Keyence Italia SPA

Immediate Detection of Defects for Gemalto.

Gemalto has improved productivity by using Keyence's CV-5000 vision system to inspect protective transparent resin overlays on its smart-card micromodules and quickly halt production if a defect is detected.

Baumer

High performance comes in two sizes

(July 8, 2013) Baumer has expanded their range of NextGen sensors. Following on from the O500 comes the O300. Both series of optical sensors offer the same performance range. While the small O300 is especially suitable for systems with very limited space, the O500 distinguishes itself in applications that require a greater range. The customer can choose a sensor that is exactly right

Keyence UK

GlaxoSmithKline

GlaxoSmithKline Banks on the Flexibility of Keyence's Vision Systems.

ProSoft Technology

RLX2

ProSoft Technology® releases the 802.11n Industrial Wireless Access Point/Bridge/Repeater with Fast Roam Technology

Keyence UK

Measuring profiles for Faurecia Interior Systems

By using Keyence’s LJ-G sensor, the Automotive Equipment Manufacturer has automated its inspection of airbag deployment slits in vehicle dashboards. This resulted in stable measurements and a fast return on investment.

SOURIAU – SUNBANK Connection Technologies

Souriau Named Top Supplier for 2012 by Labinal

Labinal, a Safran Group company, presented Souriau with its 2012 Top Supplier Award during an event attended by the company's executive management and representatives of its key suppliers.

Keyence UK

High-Speed Inspection of Broken Biscuits

Nutrition & Santé is Europe's leading maker of organic and health foods. Biscuits roll off its production lines in stacks of 4 or 5 units that are then wrapped in packs and inserted in their cardboard packaging at high speed.

Baumer

For demanding applications: VisiLine cameras with IP 65/67 protection

(7/2/2013) Baumer expands its GigE camera series with ten new IP protected models that have been developed for particularly demanding industrial environments. With the IP 65 and IP 67 protective housing, every sensitive camera component, all the way to the lens, is protected from dust, water spray and temporary immersion. The cameras have an x-coded M12 connector that ensures a reliable connection to the data interface. Designed for industrial uses, they can be powered by a 12 to 24 volt or Power over Ethernet (PoE) supply.

DATAPAQ

Datapaq announces improved MicroMag thermocouple for automotive paint monitoring

Cambridge, UK – Extending the Oven Tracker XL2 system, Datapaq introduces the new and improved MicroMag thermocouple designed for use in automotive paint monitoring. Working extensively with key automotive paint operations worldwide, Datapaq has further extended the operating capability of the popular MicroMag thermocouple. The new encapsulated magnet design allows reliable direct use during production, even on wet painted and e-coated substrates. It eliminates any risk of either magnet damage or magnet loss when the probe is removed from a cured paint surface at the end of the oven process. The miniature surface and air thermocouple which employs state-of-the-art samarium-cobalt magnet technology can be placed into the tightest of recesses. It is therefore ideal for car body shell areas that are difficult to access. Due to its low thermal mass, the MicroMag provides response characteristics that challenge those of exposed junction thermocouples while it has the additional advantage of quick and easy attachment to ferrous substrates. Despite its compact size, 17 mm in diameter, the magnet ensures secure hold up to the maximum experienced paint and powder coating cure temperatures. An aluminum knob for easy routine rugged handling, even when wearing gloves, can be removed, if necessary, to suit application requirements.

Southco

New lockable flush handle from Southco installs quickly and provides added security

Southco’s P2 Flush Pull Lockable combines the reliability and fast installation of the standard P2 product class with the added security of an integrated cam lock. This one-piece assembly features single-hole panel preparation and built-in tabs that snap into position behind the panel to hold the pull in place without added tools, reducing installation time and effort.

Join the 155,000+ IMP followers