12
'18
Written on
Baumer
12
'18
Written on
Baumer
More performance for high-speed image processing: QX series with 12 megapixel at 335 fps and 10 GigE interface
With the QX series cameras, Baumer sets new standards for high-speed image processing. With 12 megapixel resolution at 335 fps in Burst Mode, the cameras capture fine details and defects extremely precisely in high-dynamic processes. The 10 GigE interface continuously transfers data with a high bandwidth of 1.1 GB/s. This makes the cameras ideal for applications that require very high frame rates for short sequences. As a result they are suitable, for example, for process analysis in industrial applications, for living cell analysis in medical applications, for scientific research or for motion analysis in sports. A first model, equipped with the CMOS global shutter CMV12000 sensor by ams (CMOSIS), is available in the fourth quarter of 2017.
12
'18
Written on
Kennametal
KBH10 – Mastering the challenges of hard turning
Because harder doesn’t have to mean more difficult
12
'18
Written on
CAMILLE BAUER
From photovoltaic systems, to battery storage and electromobility: energy efficiency in direct current systems
The trend towards efficient utilization of limited resources has led to the introduction of a host of activities for energy efficiency improvement. For DC systems especially, monitoring their performance and error-free operation is fundamental. Photovoltaic and battery storage systems are particularly relevant here and the focus is also evidently on the power supplies of emerging electromobility solutions.
12
'18
Written on
CAMILLE BAUER
Digitization of the energy sector A new enhancement for energy automation
To address the needs of the energy automation sector and in the context of digitization, Camille Bauer is introducing higher-performance variants of the CENTRAX CU3000 and CU5000. As well as the BASIC version the ADVANCED version is now also available. The CENTRAX is a 2-in-1 device, combining in a single housing a highly precise measurement device for monitoring electrical parameters and the functionality of a programmable logic controller. It supports the CODESYS development environment for developing IEC 61131-3 compliant industrial automation applications.
12
'18
Written on
CAMILLE BAUER
Camille Bauer joins in strengthening Switzerland's manufacturing base: people and digitisation work together in a new manufacturing service
Swiss industry contributes to our country's innovation, full employment and competitiveness. Switzerland's manufacturing base is indispensable, but industry must seize on the opportunities of digitisation". This postulation from a video message by Federal Councillor Johann Schneider-Ammann to the Industry 2025 initiative on 19.09.2017 was published in the October 2017 issue of swiss technology magazine.
12
'18
Written on
CAMILLE BAUER
Digitisation of tap changers: Modernising power transformers efficiently
Renewable energies and distributed energy resources are reflections of the era of energy transition. Smart grids with optimal load distribution are now closer to becoming reality. However, what happens to the existing substations in the distribution net-works? Will they able to handle the requirements, now that power quality concerns are emerging more and more? What is to happen to the older systems which now still operate manually or semi-manually? What is to be done about distribution networks with power transformers that are based on different technologies?
12
'18
Written on
SOURIAU – SUNBANK Connection Technologies
Esterline Connection Technologies – SOURIAU has been a recognized name in the nuclear industry for several decades
Many industries require connectors to interconnect the electrical and electronic systems that are vital to controlling their processes and ensure the safety of equipment. The nuclear industry is no exception to this. Thanks to its many years of collaboration with leaders in the industry, SOURIAU possesses extensive experience in meeting the requirements of nuclear environments.
12
'18
Written on
Norelem
Overcoming manufacturing productivity as standard
The UK is constantly under pressure to streamline costs and become more economically competitive on a global scale. It is widely publicised that UK manufacturing has a vital role to play in improving the country’s overall productivity. However, while many firms are looking to new technologies, robotics and automation to stay ahead of the game, Marcus Schneck, CEO at norelem has an alternative solution; one which streamlines the planning and manufacturing process without incurring additional cost in the form of overheads – standard components.
12
'18
Written on
British Steel
