11
'11
Written on
MAYR
11
'11
Written on
REDEX
A new Tension Leveling Line to be supplied to GARMCO - Bahrain, by REDEX – France
A new contract has been signed between Gulf Aluminium Rolling Mill Company (GARMCO) and REDEX in early May 2011 to supply a modern high performance Tension Leveling Line for aluminium strip, including the complete design, manufacture and commissioning at GARMCO’s plant (Manama - Bahrain). As one of the major parts of GARMCO's ambitious investment program, this REDEX Tension Leveling Line is intended to improve the global plant capacity and to ensure the highest level of quality, especially in terms of flatness and cleanliness, for aluminium strip from 0.25 to 3.2 mm thickness.
08
'11
Written on
Westermo Teleindustri AB
Westermo industrial Ethernet switch reduces the stress for ABB Force Measurement
ABB FM (Force Measurement) is using Westermo’s Redfox industrial Ethernet switch with its latest version of Stressometer system for measurement and control of rolling mills. The implementation of the Redfox Industrial device has helped to reduce the number of data communication products needed from six to one, simplifying the system and lowering costs.
08
'11
Written on
EPLAN
EPLAN Data Portal 2.0
Maximum speed and easy searching and finding are the main advantages of the new EPLAN Data Portal which already includes data for more than 120,000 devices. Users benefit from access to the latest, up-to-date data which can be more quickly and easily integrated in engineering using the new EPLAN Platform 2.0.
05
'11
Written on
British Steel
Blackfriars Station to be the first SilentTrack® installation in the UK.
The SilentTrack® noise damping system, developed by Tata Steel, has been installed to date on over 120km of railway track worldwide. It will be installed in the UK at Blackfriars station as part of work to ensure that the enhanced Thameslink Route still complies with noise legislation despite the increase in rail traffic.
03
'11
Written on
HMS Industrial Networks AB
New gateway from HMS enables CAN-devices to connect to industrial networks
The Anybus® Communicator CAN™ is a new protocol converter from HMS Industrial Networks. The gateway enables communication between any industrial device with a CAN interface and industrial networks such as Profibus, Profinet, DeviceNet, EtherNet/IP, EtherCAT or CANopen.
01
'11
Written on
EATON
Eaton Completes the Integration of Moeller with Product Branding and New Packaging
Eaton is about to complete the integration of the Moeller Group acquired in 2008 with changes to its products and packaging: From July 1 Eaton will start to replace the Moeller logo with the Eaton logo on all products and packaging. These changes in the product range will be completed over the course of 2011 by the planned completion date of January 1 2012.
25
'11
Written on
HMS Industrial Networks AB
New Anybus CompactCom module connects devices to BACnet/IP
HMS Industrial Networks now releases Anybus® CompactCom™ for BACnet/IP – a network communication module which can be embedded into air conditioning equipment, pumps, ventilation devices etc. in order to enable communication with the BACnet/IP network.
24
'11
Written on
EATON
Simple Plant Modifications with SmartWire-DT Universal Modules
When functions have to be retrofitted on a plant, modifications to the hardware configuration and program expansions normally involve considerable costs. The universal modules of Eaton's SmartWire-DT communication system now offer a very simple solution for these requirements.
24
'11
Written on
Southco
