14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

EMCO GmbH

6200 travelling column machining centres

With the MMV 4200 / 5200 / 6200 models, EMCO introduces an extension to its MMV series, featuring enlarged travel paths (X= 4200 / 5200 / 6200) in response to increased demand in the travelling column machine segment. The machines with 3, 4 and 5 axes can be used for complete machining of very large and heavy parts in one clamping. The proven technology MMV 3200 has been kept in the new models: a high-performance motor spindle with 0 - 15,000 rpm speed range, 46 kW spindle power and up to 170 Nm torque. 40 tool pockets available as standard, optionally expandable up to 120 pockets. Thanks to the new modular system, customers do not have to choose between a smaller machine or one that is too large; variable sizes are possible up to 6,200 mm. The main difference between the MMV 4200 / 5200 and 6200 and the previous model is the X-axis drive, which uses a rack-and-pinion system instead of ball screws. This ensures dynamic, fast and precise feed during machining. The demand for these high-performance machines comes mainly from the petroleum industry, railroad industry and intralogistics.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

Green HIlls News

Green Hills Software to Provide INTEGRITY-178 tuMP RTOS for Military GPS User Equipment

Green Hills Software has announced the selection of the INTEGRITY^®-178 tuMP real-time operating system (RTOS) by Raytheon Intelligence & Space (RI&S) for their offering of the Military Global Positioning System User Equipment (MGUE) Increment (Inc) 2 Miniature Serial Interface (MSI) with Next-Generation Application Specific Integrated Circuit (ASIC).

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

MICRO EPSILON News

HIGH RESOLUTION DEPTH MAPPING OF ORGANIC MATERIAL

Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements of muscle mass or bones in combination with camera systems.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

Safran News

Flair Airlines selects Safran Carbon Brakes on its 737NG and 737MAX fleet

Canadian ultra-low-cost carrier Flair Airlines has selected Safran Landing Systems wheels and carbon brakes to equip its 737NG and 737MAX aircraft fleet.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

3D SYSTEMS News

3D Systems Advances Jewelry Design with Launch of VisiJet^® Wax Jewel Red Material

3D Systems (NYSE:DDD), the jewelry market leader in 100% lost wax casting, introduced VisiJet^® Wax Jewel Red – the latest innovation to its materials portfolio that is transforming the art of jewelry production.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

Sigfox News

CASE STUDY - FEGA & SCHMITT

FEGA & Schmitt cut cost by 75% with smart roll cages from Wanzl and BOX ID Systems connected to Heliot’s 0G Network.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

ST News

Time-of-Flight 8×8 Multi-Zone Ranging Sensor from STMicroelectronics Enables Innovative Applications

STMicroelectronics has announced the first multi-zone FlightSense time-of-flight sensor to be offered for general-purpose applications, bringing sophisticated distance sensing to the full spectrum of consumer and industrial products.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

EPPINGER NEWS

The unique automatic tool holder clamping for the indexers on cnc turning & nilling centres - QUICKLOCK

At this year's EMO, the world's leading international trade fair for metalworking in Milan (Oct. 4-9, 2021), the Eppinger Group from Denkendorf, Germany, will present its innovative tool holders and tool systems especially for turning/milling centres. Eppinger at EMO 2021 in hall 4, booth B11.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

Emerson News

Emerson’s New Emissions Monitoring System Ensures Compliance with Evolving Environmental Regulations

Emerson announced the new Rosemount XE10 Continuous Emissions Monitoring System (CEMS), which is designed to help industrial plants meet increasingly stringent environmental regulations and evolving sustainability demands.

Read more…

14 {{ "2021-09-14T00:00:00+00:00" | date "MMM" }} '21

Written on {{ "2021-09-14T00:00:00+00:00" | date "longDate" }}

Terabee News

An introduction to 3D Time-of-Flight for depth sensing: Webinar

Terabee hosts free webinar Thursday, 16 September, 2021 at 3pm CEST.

Read more…

Case studies

IDS multi-camera AI system enables fully automated, defect-free inspection in metalworking and automotive

Machining large parts without reclamping: MMV 4200 / 5200 / 6200 travelling column machining centres

Green Hills Software to Provide INTEGRITY-178 tuMP RTOS for Military GPS User Equipment

HIGH RESOLUTION DEPTH MAPPING OF ORGANIC MATERIAL

Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements of muscle mass or bones in combination with camera systems.

Flair Airlines selects Safran Carbon Brakes on its 737NG and 737MAX fleet

Canadian ultra-low-cost carrier Flair Airlines has selected Safran Landing Systems wheels and carbon brakes to equip its 737NG and 737MAX aircraft fleet.

3D Systems Advances Jewelry Design with Launch of VisiJet^® Wax Jewel Red Material

3D Systems (NYSE:DDD), the jewelry market leader in 100% lost wax casting, introduced VisiJet^® Wax Jewel Red – the latest innovation to its materials portfolio that is transforming the art of jewelry production.

CASE STUDY - FEGA & SCHMITT

FEGA & Schmitt cut cost by 75% with smart roll cages from Wanzl and BOX ID Systems connected to Heliot’s 0G Network.

Time-of-Flight 8×8 Multi-Zone Ranging Sensor from STMicroelectronics Enables Innovative Applications

STMicroelectronics has announced the first multi-zone FlightSense time-of-flight sensor to be offered for general-purpose applications, bringing sophisticated distance sensing to the full spectrum of consumer and industrial products.

The unique automatic tool holder clamping for the indexers on cnc turning & nilling centres - QUICKLOCK

At this year's EMO, the world's leading international trade fair for metalworking in Milan (Oct. 4-9, 2021), the Eppinger Group from Denkendorf, Germany, will present its innovative tool holders and tool systems especially for turning/milling centres. Eppinger at EMO 2021 in hall 4, booth B11.

Emerson’s New Emissions Monitoring System Ensures Compliance with Evolving Environmental Regulations

Emerson announced the new Rosemount XE10 Continuous Emissions Monitoring System (CEMS), which is designed to help industrial plants meet increasingly stringent environmental regulations and evolving sustainability demands.

An introduction to 3D Time-of-Flight for depth sensing: Webinar

Terabee hosts free webinar Thursday, 16 September, 2021 at 3pm CEST.

International

Case studies

Laser profile scanners from Micro-Epsilon perform true 3D measurements based on calibrated data. TU-Darmstadt already uses this technology. The powerful 3D sensors of the scanCONTROL 2900 series perform high-resolution measurements of muscle mass or bones in combination with camera systems.

Canadian ultra-low-cost carrier Flair Airlines has selected Safran Landing Systems wheels and carbon brakes to equip its 737NG and 737MAX aircraft fleet.

3D Systems (NYSE:DDD), the jewelry market leader in 100% lost wax casting, introduced VisiJet® Wax Jewel Red – the latest innovation to its materials portfolio that is transforming the art of jewelry production.

FEGA & Schmitt cut cost by 75% with smart roll cages from Wanzl and BOX ID Systems connected to Heliot’s 0G Network.

STMicroelectronics has announced the first multi-zone FlightSense time-of-flight sensor to be offered for general-purpose applications, bringing sophisticated distance sensing to the full spectrum of consumer and industrial products.

At this year's EMO, the world's leading international trade fair for metalworking in Milan (Oct. 4-9, 2021), the Eppinger Group from Denkendorf, Germany, will present its innovative tool holders and tool systems especially for turning/milling centres. Eppinger at EMO 2021 in hall 4, booth B11.

Emerson announced the new Rosemount XE10 Continuous Emissions Monitoring System (CEMS), which is designed to help industrial plants meet increasingly stringent environmental regulations and evolving sustainability demands.

Terabee hosts free webinar Thursday, 16 September, 2021 at 3pm CEST.

International

3D Systems (NYSE:DDD), the jewelry market leader in 100% lost wax casting, introduced VisiJet^® Wax Jewel Red – the latest innovation to its materials portfolio that is transforming the art of jewelry production.