23
'12
Written on
EPLAN
21
'12
Written on
MAPLESOFT
Tighter Modelica integration in latest release of MapleSim provides unmatched system-level modeling
Enhancements include tools to speed up testing and experimentation process
21
'12
Written on
PROSOFT TECHNOLOGY EMEA
The Island of Guernsey goes wireless for water management with ProSoft Technology’s RadioLinx
The island of Guernsey is a British Crown dependency, located in the English Channel, about 30 miles from the north coast of France and 70 miles from the south coast of England. Guernsey Water has deployed a communication network to integrate 40 facilities into a single network. These range from pumping stations and water treatment works to land and office buildings. The ProSoft Technology solution, based on IEEE 802.11n standard, proved to be a reliable, easy to integrate and cost-effective solution.
21
'12
Written on
STAHL
New Ex i isolators for vibration sensors
Safe vibration detection in hazardous areas increases plant availability
20
'12
Written on
Kennametal
The New KenFeed 2X Milling Solution from Kennametal
The new KenFeed™ 2X milling solution from Kennametal is the latest development in high-feed for light to heavy end milling operations. Developed from the original KenFeed™ platform, which has seen industry success for over six years, this new generation promises larger depths of cut using larger inserts.
20
'12
Written on
Kennametal
New KSEM PLUS B1 Heads Extend Kennametal’s KSEM PLUS Product Range
The simple but effective KSEM PLUS™ modular system that combines the benefits of the KSEM™ modular drill (high feeds and length-to-diameter [L/D] ratios) with the benefits of an indexable drill (high speeds and low consumable costs) is the current industry benchmark when it comes to drilling large diameter applications. Kennametal is now extending its KSEM PLUS range by introducing new KSEM PLUS B1 Heads with DFC guiding pads to deliver reduced cost per hole in difficult drilling conditions.
20
'12
Written on
Kennametal
KSRM — A New Multipurpose Line of Milling Cutters from Kennametal
The KSRM™ line of cutters is a new, multipurpose milling solution from Kennametal specifically engineered for titanium and stainless steel applications. Their design enables pocketing, profiling, ramping, and plunging with up to 1mm fz. KSRM milling cutters deliver consistent performance and excellent metal removal rates with the lowest cutting forces for roughing applications.
20
'12
Written on
Kennametal
Kennametal Introduces the New Mill 1-7 High-Performance Shoulder Mill for Small Diameters
As the latest complement to the Mill 1™ platform for finishing operations, Mill 1-7™ is Kennametal’s solution for finishing in small diameter milling. This new line is specifically engineered to cover ramping, slotting, and plunging for aerospace, energy, and general engineering applications. Mill 1-7 is a diverse tool for roughing and finishing operations, where small diameter end mills are required.
20
'12
Written on
Kennametal
Innovative RMB-E and RHM-E Expandable Reamers from Kennametal
Kennametal introduces a new line of innovative, expandable, high performance reamers. RMB-E™ monobloc and RHM-E™ modular reamers are accurate, easy-to-use, expansion tools that are unlike any similar device available.
20
'12
Written on
Kennametal
