13
'17
Written on
BRADY
13
'17
Written on
Morgan Advanced Materials
Morgan Advanced Materials develops new materials for use in aerospace components
Following extensive research and development, Morgan Advanced Materials has successfully produced two new materials which offer superior performance and higher casting yields when used in injection-moulded ceramic cores for the aerospace market.
13
'17
Written on
Latty
CARTseal B24: Latty's new fully approved mechanical
CARTseal B24: Latty's new fully approved mechanical |
13
'17
Written on
Fluke Process Instruments
Line of high-temperature ratio pyrometers expanded
Wider temperature range, new application areas Fluke Process Instruments has added four new single-color and two-color pyrometers to the Endurance series. The series now covers measured temperatures from 50 °C to 3,200 °C. The manufacturer has enhanced the maximum optical resolution from 150:1 to 300:1, enabling measuring of even smaller targets from a distance. A new low-temp ratio pyrometer for demanding applications measures temperatures from 250 °C. The sensors feature galvanically isolated inputs/outputs and a stainless steel IP65 housing.
13
'17
Written on
Fluke Process Instruments
Compact logger checks cure of coated monoblock containers
Fluke Process Instruments has developed a miniature monitoring solution for monoblock cure processes. The DATAPAQ MonoPaq2 system profiles the metal temperature of coated aluminum bottles, aerosols, and collapsible tubes both in IBO and OBO lines. The thermal barrier measures merely 41 x 48 x 195 mm, making it 43% smaller by volume than the preceding generation. The temperature profiling system can be used in lines with very closely spaced pins (>45 mm) and with various product basket sizes. This engineering success is primarily based on the development of a new data logger with a minimal footprint. The new DATAPAQ Q18 logger connects four thermocouples via micro-miniature sockets and logs up to 32,000 readings per channel with an adjustable interval of 0.05 s or more. Its accuracy of ±0.5 °C puts it squarely in the class of the best available loggers.
11
'17
Written on
Makino
International Aerospace and Die & Mould Forum at Makino: Paving the way for tomorrow today
Kirchheim unter Teck, February 2017 – Expert presentations, live demonstrations, interactive panel discussions and networking amongst more than 300 experts from across Europe: The two sessions of Makino’s well-attended Die & Mould and Aerospace Forum focussed on the ‘Industry of Tomorrow’ in die & mould and on ‘Innovative Manufacturing Processes’ for the aerospace industry.
09
'17
09
'17
Written on
Delta Electronics
Delta’s Diversified Set of Smart Energy-Saving Solutions for Buildings, Factories, Telecom Sites, Datacentres and Green Power Plants Lands at Middle East Electricity 2017
Delta, a global leader in power and thermal management solutions, announced today its highly diversified spectrum of smart, green products and solutions, capable of facilitating significant energy savings in a wide range of industrial and commercial applications, is present at Middle East Electricity (MEE) 2017. The portfolio will feature innovative technologies boasting leading energy efficiency, such as telecom power with up to 98%, solar PV inverters with up to 98.8% and uninterruptible power supplies (UPS) over 96%, as well as total solutions, including Delta’s Building Management & Control System (BMCS), an intelligent platform to enable energy efficiency in buildings, and the Smart Factory and Cloud Solution, for real-time and comprehensive supervision of industrial facilities.
09
'17
Written on
Moxa
X86-Computer for Energy, Transportation, Marine, Oil and Gas
Embedded World 2017, Booth 1-110 Moxa’s DA-720-DPP series of rackmount computers enables reliable system operation in specialized automation applications, not least due to its compliance with IEC-61850-3-, IEEE 1613-, and IEC 60255.
09
'17
Written on
Moxa
