New planetary gearhead reaches record levels FAULHABER in introducing the most powerful power transmission technology in its size class to the market with the new 20/1R planetary gearhead: A diameter of 20 mm allows the stainless steel gearhead to achieve continuous torque of 800 mNm, and up to 1100 mNm for short periods during interval operation. Following intensive development with a comprehensive series of tests, the power output was able to be more than tripled in comparison to previous models. The input speed reaches 12,000 rpm. The 20/1R can be combined with DC, brushless motors and stepper motors with a diameter of 17 to 22 mm.

FAULHABER brings affordable micromotor onto the market FAULHABER is expanding its range of drives in the medium power range with the new 1727…CXR DC-micromotor, and is adding an extremely compact drive to the CXR series. A powerful neodymium magnet gives the graphite-commutated motor a high power density with a continuous torque of 4.9 mNm. It generates this power in a housing that is just 17 mm in diameter and 27 mm in length. The temperature range in which it can be used is from -30 to +100°C.

Additional power with the new FAULHABER 2668 … CR motor The new 2668 … CR DC motor from FAULHABER offers considerably more power than comparable drives, and is the most powerful copper-graphite commutated DC-micromotor in its size class on the market. Thanks to a bigger NdFeB magnet and a high copper content in the winding, it supplies a rated torque of 70 mNm. As a result, it weighs just 189 g with a diameter of 26 mm. Furthermore, it reaches full power extremely quickly with its high pulse torque. The 2668 … CR is thus especially well suited for professional high-performance tools such as pruning shears or motorised screwdrivers.

The new series 3274 BP4

New linear DC-Servomotors with Axial Connection, Series LM1247 and LM2070

Whether soldering, induction brazing or laser welding the weld filler metal is often delivered by wire. The system must always deliver a reproducible length of filler metal to the correct destination, but without jolting or bending the wire in the process. A new automatic wire feeder driven by a Faulhaber controlled micromotor is now providing a reliable solution to this problem.

Motion Controller Series MC... 3003 and 3006

In launching Series 3272… CR, FAULHABER has set a new standard within the category of DCMicromotors with graphite commutation. Incorporating premium-quality materials and produced with the help of cutting-edge process technology, the highly robust and durable miniature drive boasts torque of up to 120 mNm while measuring just 32 mm in diameter and 72 mm in length.

Minimal pitch deviation for maximum precision

FAULHABER is adding two new Speed Controllers to its controller range. The PI Controller series is software-configurable – so no need for trimmers or DIP switches – and can be operated with one and the same controller, either as brushed direct current motors (DC) or electronically commuted drives (BL), also with integrated Hall sensors. Depending on the operating mode, the speed can be controlled to between 50 and 60,000 rpm.