Metrios. Measurement System and Mechanical Precision Instruments

High quality injection molding. "A contactless measuring machine was the ideal solution for measuring rubber".

NOT JUST A NUMBER. EVERY MACHINE HAS ITS OWN NAME

"Our employees aren’t just numbers, and neither are our machines. Here, every machine has its own name, even a nickname!”.

TECHNOLOGY AS YOUR BEST PARTNER

Metrios could allow you to increase the efficiency of your production processes and, at the same time, it will also offer objective results and customized solutions.

Paolo Marchetti – General Manager DEMA ITALY:

“Technology helps you avoid mistakes as you’re not obliged to remember the intricate details of a given process. Data from the previous operation is saved in the PLC or software’s memory, so all you need to do is press a few buttons, making everything easy.”


WHAT IS COMMON BETWEEN INJECTION MOLDING AND COOKING?

“Injection molding is like cooking. If you rush a cake, it’s either going to be undercooked or overcooked. The same applies to rubber.
The rubber is injected and then baked in the molding machine. So, it takes patience, time and the right temperature.”

“We produce about 40 million parts a year, with about 300 molding machines and consume about 50 tons of raw material."

WHY CHOOSING METRIOS?

"This is a part that we’ve been working on for a few years now. We had a dispute about size, and I didn’t have the right instrument to measure the tight dimensions. So, I researched contactless optical measuring instruments and found just what we were looking for METRIOS.”

“The quality-price ratio was ideal, so I put my trust in the machine and bought it”.

Discover more about Metrios Measuring Machines




“This is a 40-shore platinum silicone, so if we measure it with calipers, you could flatten it too much or too little, and end up with different measurements.
Instead, if I use Metrios, I simply place the part on the bed and any operator can pull up the program and carry out the measurement without the risk of mistakes.”

“It has to look good too. Cleaning is important as are the mold fastening finishings.
It’s subject to very delicate cryogenic finishing processes to prevent it from being damaged.”

ARE YOU A RUBBER GASKETS MANUFACTURER?
Check out the solution that best suits you!
“Having such a high-tech machine means that we can configure it with Industry 4.0 regulations, so it’s connected to our management system and all the statistics are imported from the system and are accessible from any computer at any time.”

“9 pieces in 37 seconds, inspecting 1,2,3,4,5 dimensions.”

Metrios gives you the possibility to gather data about multiple dimensions and to keep them over the time, in order to analyze all these information or even to show them to clients.

“Metrios is a quality guarantee, and it gives us peace of mind because all the dimensions that we detect, we save and all that data can be shown to the customer if necessary.”

Learn more about Metrios Company

“I think that flexibility is one of our strong points. All our processes are in-house, so there’s no risk of delays or non-conforming materials.
We follow the entire process from start to finish."